Awards · AU

Responsibility Allowances and the Overtime Loading Double-Pay Trap

Last updated 17 November 2026

By Project Payroll team

Learn when responsibility allowances enter overtime under Australian construction awards, and how to avoid paying the allowance twice.

Construction supervisor checking payroll information on a tablet beside workers and equipment on an Australian building site

A responsibility allowance should feed into overtime only once. If the award says it is paid for all purposes, include it in the overtime rate. Do not then add or multiply the same allowance again as another overtime payment.

Why the double payment happens

Responsibility allowances recognise duties above a worker’s normal classification. A common construction example is a leading hand appointed to supervise other employees.

The payroll trouble starts when the allowance is set up in two places:

  1. It is added to the worker’s ordinary hourly rate used for overtime.
  2. It is also paid as a separate allowance against the overtime hours.

Both settings can look right on their own. Together, they pay the allowance twice.

The opposite mistake also happens. Payroll calculates overtime on the base classification rate, then adds the responsibility allowance once at its ordinary value. If the allowance is all-purpose, this misses the overtime loading on that allowance.

The key question is not whether the payment is called an allowance. The key question is what the applicable award says the allowance is for, and whether it is payable for all purposes.

Check whether the allowance is all-purpose

An all-purpose allowance forms part of the rate used to calculate award payments such as overtime and some penalties. A reimbursement or expense allowance usually does not.

Under the Building and Construction General On-site Award 2020, the leading hand allowance is paid for all purposes of the award. That means it is included when calculating overtime.

As at November 2026, the leading hand allowance bands under that award are:

Number of employees supervised Allowance as a percentage of the standard rate per hour Overtime treatment
2 to 5 employees 3.7% Include once in the overtime rate
6 to 10 employees 4.8% Include once in the overtime rate
More than 10 employees 6.7% Include once in the overtime rate

These percentages are applied to the award’s standard rate, not automatically to the employee’s own hourly rate. The resulting dollar amounts can change when award rates change.

As at November 2026, common weekday overtime under the award is paid at 150% for the first 2 hours and 200% after that. As at November 2026, public holiday work is generally paid at 250%, subject to the award’s detailed conditions.

Always check the operative award and any workplace instrument applying to the employee. You can read more in our construction awards hub and test the current classification and rate through the Award Rate Checker.

A worked overtime example

Suppose a worker has:

  • A base hourly rate of $32.00.
  • An all-purpose responsibility allowance of $1.60 per hour.
  • 3 hours of weekday overtime.
  • The first 2 hours paid at 150%.
  • The third hour paid at 200%.

These dollar figures are examples only. They are not current award rates.

The overtime rate base is $33.60, being $32.00 plus $1.60.

The correct calculation is:

  • First 2 hours: $33.60 × 150% × 2 = $100.80.
  • Third hour: $33.60 × 200% × 1 = $67.20.
  • Total overtime payment: $168.00.

Here is how the common methods compare:

Calculation method Result What happened
Combined rate multiplied once $168.00 Correct
Combined rate, plus allowance multiplied again $176.00 Allowance paid twice
Base rate multiplied, plus allowance at ordinary value $164.80 Overtime loading missed on allowance

The $176.00 result occurs when payroll correctly includes the $1.60 in the overtime rate, then adds another $8.00 for the allowance across the weighted overtime hours.

The $164.80 result goes the other way. It pays overtime on the $32.00 base but pays only $1.60 for each of the 3 hours. The worker misses $3.20 because the allowance did not receive the applicable overtime loading.

Two valid ways to configure payroll

There are two broad calculation methods. Either can work, provided they are not mixed.

Method 1: Use a combined overtime rate

Build the all-purpose allowance into the rate used by the overtime earning. In the example, overtime is calculated on $33.60.

Do not also generate a separate responsibility allowance line for those overtime hours.

Method 2: Calculate the components separately

Calculate overtime on the $32.00 base. Then calculate the $1.60 allowance using the same overtime multiplier.

For the first 2 hours, that means paying both components at 150%. For the third hour, both components are paid at 200%.

This produces the same $168.00 total. It can also make the payslip easier to audit. The risk is that one component receives the wrong multiplier or is generated twice.

Watch the appointment details

Do not assume every senior worker gets a leading hand allowance. Check whether the worker was specifically appointed and how many employees they were placed in charge of.

The employee count matters because it determines whether the 3.7%, 4.8% or 6.7% band applies. If the crew size changes, the correct band may also change.

Keep records showing:

  • When the responsibility started and finished.
  • Who made the appointment.
  • The number of employees supervised.
  • The classification and standard rate used.
  • Whether the allowance was included in overtime and penalties.
  • Any higher contractual or enterprise agreement entitlement.

A vague note saying “acting supervisor” is not much help six months later. A dated appointment and crew record gives payroll something solid to follow.

Audit the earning codes before the next pay run

Start with one worker who receives a responsibility or leading hand allowance. Trace one ordinary hour, one 150% overtime hour and one 200% overtime hour.

Check whether the allowance appears inside the overtime rate, on a separate line, or both. Then add the components manually and compare the result with payroll.

Also inspect casual loading, shift penalties and public holiday rules separately. Their interaction depends on the award wording and the worker’s employment type. Do not assume every percentage simply stacks on top of every other percentage.

If the allowance has been duplicated, identify the affected pay periods and workers before making deductions or adjustments. Overpayments cannot simply be taken from a later wage without following the proper recovery process. If the allowance was excluded from overtime, calculate and pay the shortfall promptly, including any related superannuation consequences.

More on awards →

The Pay Run newsletter

Join the list, payroll for builders, explained fortnightly.

One email. Unsubscribe anytime. We never share your details.

Questions

Does every responsibility allowance have to be included in overtime?

No. Include it only when the applicable award, agreement or contract makes it part of the overtime calculation. Wording such as “for all purposes” is a strong sign that it belongs in the overtime rate. Expense reimbursements usually do not.

Is the construction leading hand allowance an all-purpose allowance?

Yes. Under the Building and Construction General On-site Award 2020, the leading hand allowance is paid for all purposes of the award. It should therefore be included once when overtime is calculated.

Can the allowance appear separately on the payslip?

Yes. A separate line is fine if the combined payment is correct. You can multiply the base rate and allowance separately, but both must receive the required overtime multiplier and the allowance must not also be built into another overtime line.

What if the worker supervises different crew sizes during the week?

Check the award wording and keep daily records of the appointment and crew size. The applicable leading hand band may change when the number of supervised employees changes. Do not rely only on the worker’s usual crew size.

How do we fix an allowance that was paid twice?

First confirm the overpayment period and calculation. Speak with the employee and follow the lawful overpayment recovery process. Do not make an unapproved deduction from wages. Also correct the earning-code setup before the next pay run.

What should we do if the allowance was left out of overtime?

Recalculate the affected overtime using the correct all-purpose rate. Pay the shortfall promptly, review any superannuation impact, provide corrected pay records where needed, and check whether other employees were affected by the same setup.

Construction payroll

Stop reading about it. Put it on your crew.

Crew Time sends approved site timesheets to Employment Hero. Ask about construction setup and award or EBA rebuild consulting, or book a walkthrough.

15 minutes, your EBA, no sales script.

No lock-in · Published pricing · We reply within one business day